Wire Spirals for Coil Binding PC360
Wire Spirals for Coil Binding PC360
Model
PC360

Item specifics

Power
Electricity
Width
360mm
Pitch
5mm
Hole type
round, oval
Punching thickness
25sheets
Binding Thickness
120sheets
Number of punch pins
56
Disgagement punch pins
0

Review

Description

Leagal  Size Manual  Coil Binding Machine PC360

With a power foot pedal to make binding easier and release your hands to hold paper to assist inserting coilSelect paper stop can easily to keep paper aligningDocument measure guide to select the right coil size by your sheet thicknessSide margin is adjustable to select which format sheet to punchDepth margin is adjustable to suit the size of coil being usedAll aluminium construction make it durable and many years worry free

  • Manual Punching up to 25 sheets 70g paper each time

  • Punching A4 format,11'' size paper.

  • Binding documents up to 180 sheets.

  • Die on request pitch: 3:1  4:1  6 mm

  • Side margin is adjustable.

Maximum:

  • Max. bind up 180 sheets 

  • Width 360mm

  • Punch up to 2.5--4mm

Document measure to determine which comb size to be used All aluminium construction make it durable and many years worry free High capacity waste container requires emptying less frequently

Model Name

PC360

Punch Width

360mm

Punching Thickness

25sheets

Punch Width

6.287mm

Disengagement Punch pins

56

Number of punch pins

56

Binding Thickness

180sheets

Motor

230V,50HZ/20W
110V,60HZ/20W

Technical modifications may be made without notice. 1 mm = 10 sheets of paper, based on 80 gsm.

All performance outputs are based on 80 gsm paper and may vary depending on the product type, the working environment and the operator. For best punching results we recommend a paper thickness of 2.0 - 2.5 mm.


  • Measure the thickness of the document and select the appropriate apron specification according to the letter

  • Select the correct comb diameter using the document measure


  • Select the correct back margin depth for the number of sheets


  • Select the correct punch profile for the sheet size. Select releasable dies as appropiate 


  • Punch sheets in small batches that do not overload the machine of the use
    (Max 25 sheets)


  • The machine punching when use handle


  • Collate the document. Load the coil on to the first 3 holes


  • Hold the document in both hands, with the coil on the right side. Touch the coil against the inserting roller to bind the document


  • Use the binding pliers to cut and fold the end of the metal coil. Clip off the excess coil



We do a lot of testing before final package to pursue "100% quality" goal!